Strandwoven Wood Company bamboo flooring: bamboo flooring products

	home ~ about us ~ bamboo materials ~ strandwoven products ~ gallery ~ contact ~ resources

Bamboo is a widely varied grass and the fastest growing plant in the world.
Bamboo can grow up to a meter per day until it reaches its final height, which can take as little as three months. Due to this rapid growth period,
bamboo has over 25 times the yield (weight per acre/ per year) of timber.

bamboo grows throughout southeast Asia

Strandwoven™ Wood Company has interacted
with city officials, heads of forestry, and regional economic advisors to ensure that our efforts help the region and the
commuity where our harvesting and manufacturing occurs.

Strandwoven™ Bamboo Flooring Products

Strandwoven™ Bamboo is available in two finishes: Strandwoven™ Dark and Strandwoven™ Natural Light.

Strandwoven™ Dark	Strandwoven™ Natural Light

Strandwoven™ Bamboo Specifications:

Flooring dimensions:

5/8” x 3-3/4” x 72”

Prefinished: total 7 coats (Aluminum Oxide imbedded Urethane, with two “Anti-Scratch” topcoats).

Unfinished: site finish must be applied.

Flooring Accessories:

Strandwoven™ Testing Data

Species:	Mao Tsu (Hairy Bamboo)
Milling:	Tongue and groove with micro-bevel edge; back is channeled
Chemical Treatment:	Natural borate solution to eliminate pests and mildew
Finish:	7 layers total - Five base coats of 100 percent solids, non off-gassing, water-based system with aluminum oxide, followed with two top coats of scratch-resistant polyurethane
Hardness:	ASTM D 1037, Janka Ball: 2600 psi (avg.)
Dimensional Stability:	ASTM D 1037-99: less than 0.00144
Flammability:	ASTM E 622: Maximum 270 in flaming mode; 330 in non-flaming mode
Smoke Density:	ASTM E 622: Maximum 270 in flaming mode; 330 in non-flaming mode
Compressive Strength:	ASTM D 3501: Minimum 7,600 psi (52 MPa) parallel to grain; 2,624 psi (18 MPa) perpendicular to grain
Tensile Strengthy:	ASTM D 3500: Minimum 15,300 psi (105 MPa) parallel to grain
Slip Resistance:	ASTM D 2394: Static Friction Coefficient 0.562; Sliding Friction Coefficient 0.497
Abrasion Resistance:	ASTM D 4060, CS-17 Taber abrasive wheels: Final wear-through: Minimum 12,600 cycles
Moisture Content:	ASTM D 4442, Oven Dry Method: 7.2 percent average
Formaldehyde Emissions:	ASTM E 1333: 0.02 ppm Phenol avg.

Strandwoven Wood Company is committed to sustainable design

home ~ about us ~ bamboo materials ~ strandwoven products ~ gallery ~ contact ~ resources

Website Performance by SiteTechnician Strandwoven is a registered trademark of the Strandwoven Wood Company	Copyright 2004 Strandwoven Wood Company info@strandwoven.com (720) 564-4922 privacy policy	View our gallery here!